The DB I got had everything removed and now I am at the point of installing the rear pop out side glass. Does anyone have a pic of the attachment and the pieces required . I may have all I need or may be missing something. Appreciate any pics or advice - Mike H.
top of page
Fiat Abarth 750GT Zagato Forum
Anchor 1
bottom of page
Does anybody have pictures of the side window installation for plexiglass windows with alloy frames- also I need a source for the seal that goes above these windows.
it looks to me as if the alloy frames are 'screwed to the body upper and lower and then the plexiglass is slid into the frame from the B pillar and a final closing trim fixed to the B pillar but would like to know what rubber seals people have used
sorry for so many different posts. could not figure out how to do all the photos in one reply.
I have not worked on the car ever. I believe i have a pretty/very accurate restoration. I have never seen a list of parts required to complete this portion. I have taken a lot of photos for my rear windows, i apologize for any reflections or anything that is not very clear. They appear to wedge into the front trim (b pillar) and then are bolted into the C pillar. there is rubber trim lining the front, top, and bottom. there is no rubber trim on the back side. The inside movable vent is attached to the interior of the car under the liner. Once again i am not the expert in this but hope this assists in your project.